solution/integration/smo/non-rt-ric/data/prepareDmaapMsg.sh

   1 #!/bin/bash
   2
   3 #  ============LICENSE_START===============================================
   4 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
   5 #  ========================================================================
   6 #  Licensed under the Apache License, Version 2.0 (the "License");
   7 #  you may not use this file except in compliance with the License.
   8 #  You may obtain a copy of the License at
   9 #
  10 #       http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 #  Unless required by applicable law or agreed to in writing, software
  13 #  distributed under the License is distributed on an "AS IS" BASIS,
  14 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 #  See the License for the specific language governing permissions and
  16 #  limitations under the License.
  17 #  ============LICENSE_END=================================================
  18 #
  19
  20 # The scripts in data/ will generate some dummy data in the running system.
  21 # It will create:
  22 # one policy type in a1-sim-OSC
  23 # one service in policy agent
  24 # one policy in a1-sim-OSC
  25 # one policy in a1-sim-STD
  26
  27 # Run command:
  28 # ./prepareDmaapMsg.sh [dmaap-mr port] [a1-sim-OSC port] [a1-sim-STD port] [http/https]
  29
  30 dmaa_mr_port=${1:-3904}
  31 a1_sim_OSC_port=${2:-30001}
  32 a1_sim_STD_port=${3:-30003}
  33 a1_sim_STD_v2_port=${4:-30005}
  34 httpx=${5:-"http"}
  35
  36 echo "using dmaap-mr port: "$dmaa_mr_port
  37 echo "using a1-sim-OSC port: "$a1_sim_OSC_port
  38 echo "using a1-sim-STD port: "$a1_sim_STD_port
  39 echo "using a1-sim-STD-v2 port: "$a1_sim_STD_v2_port
  40 echo "using protocol: "$httpx
  41 echo -e "\n"
  42
  43 echo "dmaap-mr topics:"
  44 curl -skw %{http_code} $httpx://localhost:$dmaa_mr_port/topics/listAll
  45 echo -e "\n"
  46
  47 echo "dmaap-mr create topic A1-POLICY-AGENT-READ:"
  48 curl -skw %{http_code} -X POST "$httpx://localhost:$dmaa_mr_port/topics/create" -H  "accept: application/json" -H  "Content-Type: application/json" -d "{  \"topicName\": \"A1-POLICY-AGENT-READ\",  \"topicDescription\": \"test topic\",  \"partitionCount\": 1,  \"replicationCount\": 1,  \"transactionEnabled\": \"false\"}"
  49 echo -e "\n"
  50
  51 echo "dmaap-mr create topic A1-POLICY-AGENT-WRITE:"
  52 curl -skw %{http_code} -X POST "$httpx://localhost:$dmaa_mr_port/topics/create" -H  "accept: application/json" -H  "Content-Type: application/json" -d "{  \"topicName\": \"A1-POLICY-AGENT-WRITE\",  \"topicDescription\": \"test topic\",  \"partitionCount\": 1,  \"replicationCount\": 1,  \"transactionEnabled\": \"false\"}"
  53 echo -e "\n"
  54
  55 echo "dmaap-mr topics:"
  56 curl -skw %{http_code} $httpx://localhost:$dmaa_mr_port/topics/listAll
  57 echo -e "\n"
  58
  59 echo "ric1 version:"
  60 curl -skw %{http_code} $httpx://localhost:$a1_sim_OSC_port/counter/interface
  61 echo -e "\n"
  62
  63 echo "ric2 version:"
  64 curl -skw %{http_code} $httpx://localhost:$a1_sim_STD_port/counter/interface
  65 echo -e "\n"
  66
  67 echo "ric3 version:"
  68 curl -skw %{http_code} $httpx://localhost:$a1_sim_STD_v2_port/counter/interface
  69 echo -e "\n"
  70
  71 echo "create policy type 1 to ric1:"
  72 curl -X PUT -skw %{http_code} $httpx://localhost:$a1_sim_OSC_port/policytype?id=1 -H Content-Type:application/json --data-binary @testdata/OSC/policy_type.json
  73 echo -e "\n"
  74
  75 echo "create policy type 2 to ric3:"
  76 curl -skw %{http_code} $httpx://localhost:$a1_sim_STD_v2_port/policytype?id=2 -X PUT -H Accept:application/json -H Content-Type:application/json -H X-Requested-With:XMLHttpRequest --data-binary @testdata/v2/policy_type.json
  77 echo -e "\n"
  78
  79 for i in {1..12}; do
  80         echo "policy types from policy agent:"
  81     curlString="curl -skw %{http_code} $httpx://localhost:8091/policy_types"
  82     res=$($curlString)
  83     echo "$res"
  84     expect="[\"1\",\"2\"]200"
  85     if [ "$res" == "$expect" ]; then
  86         echo -e "\n"
  87         break;
  88     else
  89         sleep $i
  90     fi
  91 done
  92
  93 ## Using PMS v1 interface
  94 echo "create service 1 to policy agent via dmaap_mr:"
  95 curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @testdata/dmaap/v1/dmaap-msg-service-create.json
  96 echo -e "\n"
  97
  98 echo "get result from mr of previous request:"
  99 curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
 100 echo -e "\n"
 101
 102 echo "create policies to ric1 & ric2 & ric3 with type1 and service1 via dmaa_mr:"
 103 curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @testdata/dmaap/v1/dmaap-msg-policy-create.json
 104 echo -e "\n"
 105
 106 echo "get result from mr of previous request:"
 107 curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
 108 echo -e "\n"
 109
 110 echo "get policy from policy agent via dmaap_mr:"
 111 curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @testdata/dmaap/v1/dmaap-msg-policy-get.json
 112 echo -e "\n"
 113
 114 echo "get result from mr of previous request:"
 115 curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
 116 echo -e "\n"
 117
 118 ## Using PMS v2 interface
 119 echo "create service 2 to policy agent via dmaap_mr:"
 120 curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @testdata/dmaap/v2/dmaap-msg-service-create.json
 121 echo -e "\n"
 122
 123 echo "get result from mr of previous request:"
 124 curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
 125 echo -e "\n"
 126
 127 echo "create policies to ric1 & ric2 & ric3 with type1 and service1 via dmaa_mr:"
 128 curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @testdata/dmaap/v2/dmaap-msg-policy-create.json
 129 echo -e "\n"
 130
 131 echo "get result from mr of previous request:"
 132 curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
 133 echo -e "\n"
 134
 135 echo "get policy from policy agent via dmaap_mr:"
 136 curl -k -X POST -sw %{http_code} -H accept:application/json -H Content-Type:application/json "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-READ/" --data-binary @testdata/dmaap/v2/dmaap-msg-policy-get.json
 137 echo -e "\n"
 138
 139 echo "get result from mr of previous request:"
 140 curl -X GET "$httpx://localhost:$dmaa_mr_port/events/A1-POLICY-AGENT-WRITE/users/policy-agent?timeout=15000&limit=100" -H "accept: application/json" -H "Content-Type: application/json" | jq .
 141 echo -e "\n"
 142
 143 ## Get metric from rics
 144 echo "policy numbers from ric1:"
 145 curl -skw %{http_code} $httpx://localhost:$a1_sim_OSC_port/counter/num_instances
 146 echo -e "\n"
 147
 148 echo "policy numbers from ric2:"
 149 curl -skw %{http_code} $httpx://localhost:$a1_sim_STD_port/counter/num_instances
 150 echo -e "\n"
 151
 152 echo "policy numbers from ric3:"
 153 curl -skw %{http_code} $httpx://localhost:$a1_sim_STD_v2_port/counter/num_instances
 154 echo -e "\n"
 155