1 # Service Management and Orchestration (SMO)
3 This project focus on a docker-compose deployment solution for SMO/OAM Components.
7 With respect to OAM the SMO implements the O1-interface consumers.
8 According to the O-RAN OAM Architecture and the O-RAN OAM Interface Specification,
9 the SMO implements a NETCONF Client for configuration and a HTTP/REST/VES server
10 for receiving all kind of events in VES format.
12 The setup contains an OpenDaylight based NETCONF client and an ONAP VES Collector.
16 This docker-compose file starts a pre-configured, self-contained SDN-R solution
17 with the following components.
20 ... representing an KeyCloak based identity service for centralized user
21 management. Please note that the implementation does not support IPv6.
22 Therefore, its own network is required called 'DMZ'.
23 In this configuration the external https port is 8463.
25 * **Controller** single node instance
27 ... representing the NETCONF consumer on the Service Management and
28 Orchestration framework (SMO) for the O1 interface based on
30 SDN-R comes with is own web-portal the external port is 8463.
34 ... representing the VES (REST) provider at SMO for all kind of events. In this configuration the external https port is 8443.
37 ... representing SMO MessageRouter component, includes message-router
42 $ cat /etc/os-release | grep PRETTY_NAME
43 PRETTY_NAME="Ubuntu 22.04.1 LTS"
46 Docker version 20.10.12, build 20.10.12-0ubuntu4
48 $ docker-compose version
49 docker-compose version 1.29.2, build unknown
50 docker-py version: <module 'docker.version' from '/usr/local/lib/python3.10/dist-packages/docker/version.py'>
51 CPython version: 3.10.6
52 OpenSSL version: OpenSSL 3.0.2 15 Mar 2022
59 Please modify the /etc/hosts of your system.
61 * \<your-system>: is the hostname of the system, where the browser is started
63 * \<deployment-system-ipv4>: is the IP address of the system where the solution will be deployed
65 For development purposes <your-system> and <deployment-system> may reference the same system.
70 127.0.1.1 <your-system>
72 # SMO OAM development system
73 <deployment-system-ipv4> smo.o-ran-sc.org
74 <deployment-system-ipv4> gateway.smo.o-ran-sc.org
75 <deployment-system-ipv4> identity.smo.o-ran-sc.org
76 <deployment-system-ipv4> messages.smo.o-ran-sc.org
77 <deployment-system-ipv4> ves-collector.oam.smo.o-ran-sc.org
78 <deployment-system-ipv4> odlux.oam.smo.o-ran-sc.org
79 <deployment-system-ipv4> controller.oam.smo.o-ran-sc.org
83 It is beneficial (but not mandatory) adding the following line add the
84 end of your ~/.bashrc file. I will suppress warnings when python script
85 do not verify self signed certificates for HTTPS communication.
88 export PYTHONWARNINGS="ignore:Unverified HTTPS request"
91 Please ensure that you download and copy the required 3GPP OpenAPIs for VES-stndDefined
92 message validation into the folder './solution/operation-and-maintenance/smo/oam/ves-collector/externalRepo'.
94 Please follow the instructions in ./solution/operation-and-maintenance/smo/oam/ves-collector/externalRepo/3gpp/rep/sa5/MnS/blob/Rel16/OpenAPI/README.md.
96 The following tree shows the successfully tested folder structure. It combines different versions of the schemas ('Rel16' and 'SA88-Rel16') using 3GPP branch names.
99 $ tree solution/operation-and-maintenance/smo/oam/ves-collector/externalRepo/
100 solution/operation-and-maintenance/smo/oam/ves-collector/externalRepo/
109 │ │ ├── TS28532_FaultMnS.yaml
110 │ │ ├── TS28532_FileDataReportingMnS.yaml
111 │ │ ├── TS28532_HeartbeatNtf.yaml
112 │ │ ├── TS28532_PerfMnS.yaml
113 │ │ ├── TS28532_ProvMnS.yaml
114 │ │ ├── TS28532_StreamingDataMnS.yaml
115 │ │ ├── TS28536_CoslaNrm.yaml
116 │ │ ├── TS28541_5GcNrm.yaml
117 │ │ ├── TS28541_NrNrm.yaml
118 │ │ ├── TS28541_SliceNrm.yaml
119 │ │ ├── TS28550_PerfMeasJobCtrlMnS.yaml
120 │ │ ├── TS28623_ComDefs.yaml
121 │ │ ├── TS28623_GenericNrm.yaml
122 │ │ ├── TS29512_Npcf_SMPolicyControl.yaml
123 │ │ ├── TS29514_Npcf_PolicyAuthorization.yaml
124 │ │ └── TS29571_CommonData.yaml
128 │ ├── PerDataFileReportMnS.yaml
129 │ ├── PerMeasJobCtlMnS.yaml
130 │ ├── PerThresMonMnS.yaml
131 │ ├── PerfDataStreamingMnS.yaml
136 │ ├── genericNrm.yaml
137 │ ├── heartbeatNtf.yaml
141 │ └── streamingDataMnS.yaml
144 ## Expected Folder Structure
146 The following figure show the expected folder structure for the different
147 docker-compose file and its configurations.
153 │ ├── docker-compose.yml
160 │ ├── docker-compose.yml
169 ├── docker-compose.yml
178 ### Bring Up Solution
182 The following commands should be invoked. More detailed can be found in the
186 docker-compose -f smo/common/docker-compose.yml up -d
187 # wait until the cpu load is low again
188 python smo/common/identity/config.py
190 docker-compose -f smo/oam/docker-compose.yml up -d
191 docker-compose -f smo/apps/docker-compose.yml up -d
193 # wait until the cpu load is low again
195 docker-compose -f network/docker-compose.yml up -d
197 docker restart ntsim-ng-o-du-1122
198 python network/config.py
201 #### Check (adjust if required) environment variables
209 The tested configuration uses the following external https ports:
211 * 8443 for the ves-collector
212 * 8453 for web access to ODLUX (SDNC_WEB_PORT)
213 * 8463 for the keyclock web administrator user interface.
215 #### Startup solution
217 Please note that it is necessary to configure first the identity service,
218 before starting further docker images.
220 The several docker-compose yml files must be started in the right order as listed below:
223 docker-compose -f smo/common/docker-compose.yml up -d
224 python smo/common/identity/config.py
227 The python script configure the users within the identity service (keycloak).
228 A system user (%USER) is also created with administration rights.
232 docker-compose -f smo/oam/docker-compose.yml up -d
235 Looking into the ONAP SDN-R logs will give you the startup procedure.
241 The startup was successful when you see the following line:
244 Everything OK in Certificate Installation
247 If you see the login page (https://sdnc-web:8453) you are good to go and can start the (simulated) network.
250 docker-compose -f network/docker-compose.yml up -d
253 Usually the first ves:event gets lost. Please restart the O-DU docker container(s) to send a second ves:pnfRegistration.
256 docker-compose -f network/docker-compose.yml restart ntsim-ng-o-du-1122
257 python network/config.py
260 The python script configures the simulated O-DU and O-RU according to O-RAN hybrid architecture.
262 O-DU - NETCONF Call HOME and NETCONF notifications
263 O-RU - ves:pnfRegistration and ves:fault, ves:heartbeat
265 ![ves:pnfRegistration in ODLUX](docs/nstim-ng-connected-after-ves-pnf-registration-in-odlux.png "ves:pnfRegistration in ODLUX")
267 'True' indicated that the settings through SDN-R to the NETCONF server were
270 SDN-R reads the fault events from DMaaP and processes them.
271 Finally the fault events are visible in ODLUX.
273 ![ves:fault in ODLUX](docs/ves-fault-in-odlux.png "ves:fault in ODLUX")
276 ### Log files and karaf console
281 docker exec -it sdnr tail -f /opt/opendaylight/data/log/karaf.log
284 #### ves-collector logs
287 docker logs -f ves-collector
290 ### Customizing Solution
292 '.env' file contains customizing parameters
294 ### Verification Solution
296 #### Access to SDN-R ODLUX
298 ##### Login into SDN-R
300 https://sdnc-web:8453
302 User: admin // see .env file
304 Password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
306 In case of trouble, please update the commands with your customized '.env' file.
308 ### Terminate solution
310 To stop all container please respect the following order
313 docker-compose -f network/docker-compose.yml down
314 docker-compose -f smo/oam/docker-compose.yml down
315 docker-compose -f smo/common/docker-compose.yml down
320 !!! be careful if other stopped containers are on the same system
322 docker system prune -a -f
326 In most cases the .env setting do not fit to the environment and need to be
329 Please make sure that the network settings to not overlap with other networks.