3 # ============LICENSE_START===============================================
4 # Copyright (C) 2021 Nordix Foundation. All rights reserved.
5 # ========================================================================
6 # Licensed under the Apache License, Version 2.0 (the "License");
7 # you may not use this file except in compliance with the License.
8 # You may obtain a copy of the License at
10 # http://www.apache.org/licenses/LICENSE-2.0
12 # Unless required by applicable law or agreed to in writing, software
13 # distributed under the License is distributed on an "AS IS" BASIS,
14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15 # See the License for the specific language governing permissions and
16 # limitations under the License.
17 # ============LICENSE_END=================================================
20 # This is a script that contains container/service managemnt functions test functions for the Dmaap Adatper
23 ################ Test engine functions ################
25 # Create the image var used during the test
26 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
27 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
28 __DMAAPMED_imagesetup() {
29 __check_and_create_image_var DMAAPMED "DMAAP_MED_IMAGE" "DMAAP_MED_IMAGE_BASE" "DMAAP_MED_IMAGE_TAG" $1 "$DMAAP_MED_DISPLAY_NAME"
32 # Pull image from remote repo or use locally built image
33 # arg: <pull-policy-override> <pull-policy-original>
34 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
35 # <pull-policy-original> Shall be used for images that does not allow overriding
36 # Both var may contain: 'remote', 'remote-remove' or 'local'
37 __DMAAPMED_imagepull() {
38 __check_and_pull_image $1 "$DMAAP_MED_DISPLAY_NAME" $DMAAP_MED_APP_NAME DMAAP_MED_IMAGE
41 # Build image (only for simulator or interfaces stubs owned by the test environment)
42 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
43 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
44 __DMAAPMED_imagebuild() {
45 echo -e $RED" Image for app DMAAPMED shall never be built"$ERED
48 # Generate a string for each included image using the app display name and a docker images format string
49 # If a custom image repo is used then also the source image from the local repo is listed
50 # arg: <docker-images-format-string> <file-to-append>
51 __DMAAPMED_image_data() {
52 echo -e "$DMAAP_MED_DISPLAY_NAME\t$(docker images --format $1 $DMAAP_MED_IMAGE)" >> $2
53 if [ ! -z "$DMAAP_MED_IMAGE_SOURCE" ]; then
54 echo -e "-- source image --\t$(docker images --format $1 $DMAAP_MED_IMAGE_SOURCE)" >> $2
58 # Scale kubernetes resources to zero
59 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
60 # This function is called for apps fully managed by the test script
61 __DMAAPMED_kube_scale_zero() {
62 __kube_scale_all_resources $KUBE_NONRTRIC_NAMESPACE autotest DMAAPMED
65 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
66 # This function is called for prestarted apps not managed by the test script.
67 __DMAAPMED_kube_scale_zero_and_wait() {
68 __kube_scale_and_wait_all_resources $KUBE_NONRTRIC_NAMESPACE app "$KUBE_NONRTRIC_NAMESPACE"-dmaapmediatorservice
71 # Delete all kube resouces for the app
72 # This function is called for apps managed by the test script.
73 __DMAAPMED_kube_delete_all() {
74 __kube_delete_all_resources $KUBE_NONRTRIC_NAMESPACE autotest DMAAPMED
78 # This function is called for apps managed by the test script.
79 # args: <log-dir> <file-prexix>
80 __DMAAPMED_store_docker_logs() {
81 if [ $RUNMODE == "KUBE" ]; then
82 kubectl logs -l "autotest=DMAAPMED" -n $KUBE_NONRTRIC_NAMESPACE --tail=-1 > $1$2_dmaapmediator.log 2>&1
84 docker logs $DMAAP_MED_APP_NAME > $1$2_dmaapmediator.log 2>&1
88 # Initial setup of protocol, host and ports
89 # This function is called for apps managed by the test script.
91 __DMAAPMED_initial_setup() {
95 #######################################################
97 # Set http as the protocol to use for all communication to the Dmaap mediator
99 # (Function for test scripts)
100 use_dmaapmed_http() {
101 __dmaapmed_set_protocoll "http" $DMAAP_MED_INTERNAL_PORT $DMAAP_MED_EXTERNAL_PORT
104 # Set https as the protocol to use for all communication to the Dmaap mediator
106 # (Function for test scripts)
107 use_dmaapmed_https() {
108 __dmaapmed_set_protocoll "https" $DMAAP_MED_INTERNAL_SECURE_PORT $DMAAP_MED_EXTERNAL_SECURE_PORT
111 # Setup paths to svc/container for internal and external access
112 # args: <protocol> <internal-port> <external-port>
113 __dmaapmed_set_protocoll() {
114 echo -e $BOLD"$DMAAP_MED_DISPLAY_NAME protocol setting"$EBOLD
115 echo -e " Using $BOLD http $EBOLD towards $DMAAP_MED_DISPLAY_NAME"
117 ## Access to Dmaap mediator
119 DMAAP_MED_SERVICE_PATH=$1"://"$DMAAP_MED_APP_NAME":"$2 # docker access, container->container and script->container via proxy
120 if [ $RUNMODE == "KUBE" ]; then
121 DMAAP_MED_SERVICE_PATH=$1"://"$DMAAP_MED_APP_NAME.$KUBE_NONRTRIC_NAMESPACE":"$3 # kube access, pod->svc and script->svc via proxy
124 # DMAAP_MED_ADAPTER used for switching between REST and DMAAP (only REST supported currently)
125 DMAAP_MED_ADAPTER_TYPE="REST"
126 DMAAP_MED_ADAPTER=$DMAAP_MED_SERVICE_PATH
131 # Export env vars for config files, docker compose and kube resources
132 # args: PROXY|NOPROXY
133 __dmaapmed_export_vars() {
135 export DMAAP_MED_APP_NAME
136 export DMAAP_MED_DISPLAY_NAME
138 export KUBE_NONRTRIC_NAMESPACE
139 export DOCKER_SIM_NWNAME
141 export DMAAP_MED_IMAGE
143 export DMAAP_MED_INTERNAL_PORT
144 export DMAAP_MED_INTERNAL_SECURE_PORT
145 export DMAAP_MED_EXTERNAL_PORT
146 export DMAAP_MED_EXTERNAL_SECURE_PORT
148 export DMAAP_MED_DATA_MOUNT_PATH
149 export DMAAP_MED_HOST_MNT_DIR
150 export DMAAP_MED_DATA_FILE
151 export DMAAP_MED_DATA_CONFIGMAP_NAME=$DMAAP_MED_APP_NAME"-data"
153 if [ $1 == "PROXY" ]; then
154 export DMAAP_MED_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT #Set if proxy is started
155 export DMAAP_MED_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started
156 if [ $DMAAP_MED_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$DMAAP_MED_HTTP_PROXY_CONFIG_HOST_NAME" ]; then
157 echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW
159 echo " Configured with http proxy"
162 export DMAAP_MED_HTTP_PROXY_CONFIG_PORT=0
163 export DMAAP_MED_HTTP_PROXY_CONFIG_HOST_NAME=""
164 echo " Configured without http proxy"
167 # paths to other components
168 export ECS_SERVICE_PATH
170 export DMAAP_MED_CONF_SELF_HOST=$(echo $DMAAP_MED_SERVICE_PATH | cut -d: -f1-2)
171 export DMAAP_MED_CONF_SELF_PORT=$(echo $DMAAP_MED_SERVICE_PATH | cut -d: -f3)
172 export MR_SERVICE_PATH
175 # Start the Dmaap mediator
177 # (Function for test scripts)
180 echo -e $BOLD"Starting $DMAAP_MED_DISPLAY_NAME"$EBOLD
182 if [ $RUNMODE == "KUBE" ]; then
184 # Check if app shall be fully managed by the test script
185 __check_included_image "DMAAPMED"
188 # Check if app shall only be used by the testscipt
189 __check_prestarted_image "DMAAPMED"
192 if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
193 echo -e $RED"The $DMAAP_MED_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
194 echo -e $RED"The $DMAAP_MED_APP_NAME will not be started"$ERED
197 if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
198 echo -e $RED"The $DMAAP_MED_APP_NAME app is included both as managed and prestarted in this test script"$ERED
199 echo -e $RED"The $DMAAP_MED_APP_NAME will not be started"$ERED
203 # Check if app shall be used - not managed - by the test script
204 if [ $retcode_p -eq 0 ]; then
205 echo -e " Using existing $DMAAP_MED_APP_NAME deployment and service"
206 echo " Setting DMAAPMED replicas=1"
207 __kube_scale statefulset $DMAAP_MED_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1
210 if [ $retcode_i -eq 0 ]; then
211 echo -e " Creating $DMAAP_MED_APP_NAME deployment and service"
213 __kube_create_namespace $KUBE_NONRTRIC_NAMESPACE
215 __dmaapmed_export_vars $1
217 # Create config map for data
218 data_json=$PWD/tmp/$DMAAP_MED_DATA_FILE
219 if [ $# -lt 2 ]; then
220 #create empty dummy file
221 echo "{}" > $data_json
225 output_yaml=$PWD/tmp/dmaapmed_cfd.yaml
226 __kube_create_configmap $DMAAP_MED_DATA_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest DMAAPMED $data_json $output_yaml
229 input_yaml=$SIM_GROUP"/"$DMAAP_MED_COMPOSE_DIR"/"svc.yaml
230 output_yaml=$PWD/tmp/dmaapmed_svc.yaml
231 __kube_create_instance service $DMAAP_MED_APP_NAME $input_yaml $output_yaml
234 input_yaml=$SIM_GROUP"/"$DMAAP_MED_COMPOSE_DIR"/"app.yaml
235 output_yaml=$PWD/tmp/dmaapmed_app.yaml
236 __kube_create_instance app $DMAAP_MED_APP_NAME $input_yaml $output_yaml
240 __check_service_start $DMAAP_MED_APP_NAME $DMAAP_MED_SERVICE_PATH$DMAAP_MED_ALIVE_URL
243 # Check if docker app shall be fully managed by the test script
244 __check_included_image 'DMAAPMED'
245 if [ $? -eq 1 ]; then
246 echo -e $RED"The $DMAAP_MED_DISPLAY_NAME app is not included in this test script"$ERED
247 echo -e $RED"The $DMAAP_MED_DISPLAY_NAME will not be started"$ERED
251 __dmaapmed_export_vars $1
253 dest_file=$SIM_GROUP/$DMAAP_MED_COMPOSE_DIR/$DMAAP_MED_HOST_MNT_DIR/$DMAAP_MED_DATA_FILE
255 envsubst < $2 > $dest_file
257 __start_container $DMAAP_MED_COMPOSE_DIR "" NODOCKERARGS 1 $DMAAP_MED_APP_NAME
259 __check_service_start $DMAAP_MED_APP_NAME $DMAAP_MED_SERVICE_PATH$DMAAP_MED_ALIVE_URL