1 module o-ran-supervision {
3 namespace "urn:o-ran:supervision:1.0";
4 prefix "o-ran-supervision";
6 import ietf-yang-types {
10 organization "O-RAN Alliance";
16 "This module defines the configuration data and supervision RPCs that are
17 used to detect loss M-Plane and CU-Plane connectivity.
19 Copyright 2019 the O-RAN Alliance.
21 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS'
22 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
25 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31 POSSIBILITY OF SUCH DAMAGE.
33 Redistribution and use in source and binary forms, with or without
34 modification, are permitted provided that the following conditions are met:
36 * Redistributions of source code must retain the above copyright notice,
37 this list of conditions and the above disclaimer.
38 * Redistributions in binary form must reproduce the above copyright notice,
39 this list of conditions and the above disclaimer in the documentation
40 and/or other materials provided with the distribution.
41 * Neither the Members of the O-RAN Alliance nor the names of its
42 contributors may be used to endorse or promote products derived from
43 this software without specific prior written permission.";
45 revision "2019-07-03" {
49 1) added leafs for CU plane monitoring
50 2) backward compatible changes to introduce groupings";
52 reference "ORAN-WG4.M.0-v01.00";
55 revision "2019-02-04" {
59 1) imported model from xRAN
60 2) changed namespace and reference from xran to o-ran";
62 reference "ORAN-WG4.M.0-v01.00";
65 grouping watchdog-input {
66 leaf supervision-notification-interval {
71 "The interval in seconds at which supervision notifications are sent.
72 If not specified the default value of 60 seconds shall apply.";
74 leaf guard-timer-overhead {
79 "This is overhead added to the supervision timer used to calculate the
80 supervision wathcdog timer. i.e.,
82 supervision timer = notification timer + guard-timer-overhead
84 If not specified the default value of 10 seconds shall apply.
86 Failure to send this rpc again within the timeout sets the radio into
87 'loss of supervision' state.
89 NOTE - The supervision timer MUST not be less that the confimed
90 timeout timer (when the feature is supported).
92 This type of constraint (using an RPCs input) cannot be formally
97 grouping watchdog-output {
99 type yang:date-and-time;
101 "Indicates the time when the next supervision notification is expected.";
105 grouping supervision-group {
106 container cu-plane-monitoring {
107 description "container describing operation of CU plane monitoring";
109 "Indicates O-RU supports timer based cu-plane monitoring interval. If
110 this container is NOT present, the opertaion of the O-RU is undefined.";
112 leaf configured-cu-monitoring-interval {
119 "This value corresponds to the configured value of the timer used by
120 the O-RU to monitor the C/U plane connection.
122 A value of 0 means that the O-RU's shall disable its CU plane
125 A NETCONF client should configure the value according to the
126 configuration of the PHY layer and/or C/U plane section types
127 supported and/or any fault tolerant operation. For example,
129 i) when opertaing with an O-DU supporting non-LAA LTE, this value can
130 be configured to a value according to the repetition time of
131 transmitted reference symbols across the fronthaul interface
132 ii) when opertaing with an O-DU supporting C-Plane Section Type 0,
133 this value can configured to a value according to the minimum
134 repetition interval of section type 0.
135 iii) when operating with an O-DU supporting fault tolerant operation,
136 this value can be configured according to the fault tolerant heartbeat
142 container supervision {
143 uses supervision-group;
144 // other WG specific monitoring containers follow here
147 rpc supervision-watchdog-reset {
149 "rpc to reset the watchdog timer";
155 uses watchdog-output;
159 notification supervision-notification {
161 "Notification to indicate that NETCONF management interface is up
162 and also indicate the values of the timers for this NETCONF session";