1 #******************************************************************************
3 # Copyright (c) 2019 Intel.
5 # Licensed under the Apache License, Version 2.0 (the "License");
6 # you may not use this file except in compliance with the License.
7 # You may obtain a copy of the License at
9 # http://www.apache.org/licenses/LICENSE-2.0
11 # Unless required by applicable law or agreed to in writing, software
12 # distributed under the License is distributed on an "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 # See the License for the specific language governing permissions and
15 # limitations under the License.
17 #******************************************************************************/
20 # This is simple configuration file. Use '#' sign for comments
21 instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
22 appMode=1 # O-DU(0) | O-RU(1)
23 xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
24 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
25 antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
27 #######################################################################
29 DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
32 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
34 PrbElemDl0=0,33,0,14,1,1,1,12,1
35 PrbElemDl1=33,33,0,14,2,1,1,12,1
38 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
40 PrbElemUl0=0,33,0,14,1,1,1,12,1
41 PrbElemUl1=33,33,0,14,2,1,1,12,1
42 #######################################################################
45 mu=3 #mmWave 120Khz Sub Carrier Spacing
46 ttiPeriod=125 # in us TTI period (mmWave default 125us)
47 nDLAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
48 nULAbsFrePointA=27968160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
49 nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
50 nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
54 nFrameDuplexType=1 # 0 - FDD 1 - TDD
55 nTddPeriod=4 #[0-5] TDD priod e.g. DDDS 4
56 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
57 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
58 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
59 sSlotConfig3=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
61 #sSlotConfig4=0,2,2,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
62 #sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
63 #sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
64 #sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
65 #sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
66 #sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
68 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
69 #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
70 Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
75 duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
76 ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
77 duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
78 ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
81 duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
82 ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
83 duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
84 ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
86 maxFrameId=99 # set for compatibility with O-RU
88 numSlots=20 #number of slots per IQ files
89 antC0=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0
90 antC1=./usecase/cat_a/mu3_100mhz/ant_1.bin #CC0
91 antC2=./usecase/cat_a/mu3_100mhz/ant_2.bin #CC0
92 antC3=./usecase/cat_a/mu3_100mhz/ant_3.bin #CC0
93 antC4=./usecase/cat_a/mu3_100mhz/ant_4.bin #CC1
94 antC5=./usecase/cat_a/mu3_100mhz/ant_5.bin #CC1
95 antC6=./usecase/cat_a/mu3_100mhz/ant_6.bin #CC1
96 antC7=./usecase/cat_a/mu3_100mhz/ant_7.bin #CC1
97 antC8=./usecase/cat_a/mu3_100mhz/ant_8.bin #CC2
98 antC9=./usecase/cat_a/mu3_100mhz/ant_9.bin #CC2
99 antC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2
100 antC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2
101 antC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3
102 antC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3
103 antC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3
104 antC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3
106 antPrachC0=./usecase/cat_a/mu3_100mhz/ant_0.bin #CC0
107 antPrachC1=./usecase/cat_a/mu3_100mhz/ant_1.bin #CC0
108 antPrachC2=./usecase/cat_a/mu3_100mhz/ant_2.bin #CC0
109 antPrachC3=./usecase/cat_a/mu3_100mhz/ant_3.bin #CC0
110 antPrachC4=./usecase/cat_a/mu3_100mhz/ant_4.bin #CC1
111 antPrachC5=./usecase/cat_a/mu3_100mhz/ant_5.bin #CC1
112 antPrachC6=./usecase/cat_a/mu3_100mhz/ant_6.bin #CC1
113 antPrachC7=./usecase/cat_a/mu3_100mhz/ant_7.bin #CC1
114 antPrachC8=./usecase/cat_a/mu3_100mhz/ant_8.bin #CC2
115 antPrachC9=./usecase/cat_a/mu3_100mhz/ant_9.bin #CC2
116 antPrachC10=./usecase/cat_a/mu3_100mhz/ant_10.bin #CC2
117 antPrachC11=./usecase/cat_a/mu3_100mhz/ant_11.bin #CC2
118 antPrachC12=./usecase/cat_a/mu3_100mhz/ant_12.bin #CC3
119 antPrachC13=./usecase/cat_a/mu3_100mhz/ant_13.bin #CC3
120 antPrachC14=./usecase/cat_a/mu3_100mhz/ant_14.bin #CC3
121 antPrachC15=./usecase/cat_a/mu3_100mhz/ant_15.bin #CC3
123 rachEnable=1 # Enable (1)| disable (0) PRACH configuration
126 ## control of IQ byte order
127 iqswap=0 #do swap of IQ before send buffer to eth
128 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
129 compression=1 # (1) compression enabled (0) compression disabled
132 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
133 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
134 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
136 CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
137 c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
138 u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
141 totalBFWeights=32 # Total number of Beamforming Weights on RU
143 Tadv_cp_dl=25 #in us TODO: update per RU implementation
144 #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
146 #Reception Window C-plane DL
147 T2a_min_cp_dl=50 #in us
148 T2a_max_cp_dl=140 #in us
150 #Reception Window C-plane UL
151 T2a_min_cp_ul=50 #in us
152 T2a_max_cp_ul=140 #in us
154 #Reception Window U-plane
162 ###########################################################
165 #Transmission Window Fast C-plane DL
169 ##Transmission Window Fast C-plane UL
174 ##Transmission Window
181 ###########################################################