1 #******************************************************************************
3 # Copyright (c) 2019 Intel.
5 # Licensed under the Apache License, Version 2.0 (the "License");
6 # you may not use this file except in compliance with the License.
7 # You may obtain a copy of the License at
9 # http://www.apache.org/licenses/LICENSE-2.0
11 # Unless required by applicable law or agreed to in writing, software
12 # distributed under the License is distributed on an "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 # See the License for the specific language governing permissions and
15 # limitations under the License.
17 #******************************************************************************/
20 # This is simple configuration file. Use '#' sign for comments
21 instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
22 appMode=1 # O-DU(0) | O-RU(1)
23 xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
24 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
25 antNum=4 # Number of Antennas per CC (default: 4)
28 mu=0 #15Khz Sub Carrier Spacing
29 ttiPeriod=1000 # in us TTI period (15Khz default 1000us)
30 nDLAbsFrePointA=2645460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
31 nULAbsFrePointA=2525460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
32 nDLBandwidth=10 #Carrier bandwidth for in MHz. Value: 5->400
33 nULBandwidth=10 #Carrier bandwidth for in MHz. Value: 5->400
37 nFrameDuplexType=0 # 0 - FDD 1 - TDD
38 nTddPeriod=0 #TDD priod e.g. DDDS 4
40 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
41 #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
42 Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
50 llsCUMac=00:11:22:33:44:66 # asigned MAC of lls-CU VF
51 ruMac=00:11:22:33:44:55 #RU VF for RU app
53 numSlots=40 #number of slots per IQ files
55 antC0=./usecase/mu0_10mhz/ant_0.bin #CC0
56 antC1=./usecase/mu0_10mhz/ant_1.bin #CC0
57 antC2=./usecase/mu0_10mhz/ant_2.bin #CC0
58 antC3=./usecase/mu0_10mhz/ant_3.bin #CC0
59 antC4=./usecase/mu0_10mhz/ant_4.bin #CC1
60 antC5=./usecase/mu0_10mhz/ant_5.bin #CC1
61 antC6=./usecase/mu0_10mhz/ant_6.bin #CC1
62 antC7=./usecase/mu0_10mhz/ant_7.bin #CC1
63 antC8=./usecase/mu0_10mhz/ant_8.bin #CC2
64 antC9=./usecase/mu0_10mhz/ant_9.bin #CC2
65 antC10=./usecase/mu0_10mhz/ant_10.bin #CC2
66 antC11=./usecase/mu0_10mhz/ant_11.bin #CC2
67 antC12=./usecase/mu0_10mhz/ant_12.bin #CC3
68 antC13=./usecase/mu0_10mhz/ant_13.bin #CC3
69 antC14=./usecase/mu0_10mhz/ant_14.bin #CC3
70 antC15=./usecase/mu0_10mhz/ant_15.bin #CC3
71 antC16=./usecase/mu0_10mhz/ant_0.bin #CC4
72 antC17=./usecase/mu0_10mhz/ant_1.bin #CC4
73 antC18=./usecase/mu0_10mhz/ant_2.bin #CC4
74 antC19=./usecase/mu0_10mhz/ant_3.bin #CC4
75 antC20=./usecase/mu0_10mhz/ant_4.bin #CC5
76 antC21=./usecase/mu0_10mhz/ant_5.bin #CC5
77 antC22=./usecase/mu0_10mhz/ant_6.bin #CC5
78 antC23=./usecase/mu0_10mhz/ant_7.bin #CC5
79 antC24=./usecase/mu0_10mhz/ant_8.bin #CC6
80 antC25=./usecase/mu0_10mhz/ant_9.bin #CC6
81 antC26=./usecase/mu0_10mhz/ant_10.bin #CC6
82 antC27=./usecase/mu0_10mhz/ant_11.bin #CC6
83 antC28=./usecase/mu0_10mhz/ant_12.bin #CC7
84 antC29=./usecase/mu0_10mhz/ant_13.bin #CC7
85 antC30=./usecase/mu0_10mhz/ant_14.bin #CC7
86 antC31=./usecase/mu0_10mhz/ant_15.bin #CC7
87 antC32=./usecase/mu0_10mhz/ant_0.bin #CC8
88 antC33=./usecase/mu0_10mhz/ant_1.bin #CC8
89 antC34=./usecase/mu0_10mhz/ant_2.bin #CC8
90 antC35=./usecase/mu0_10mhz/ant_3.bin #CC8
91 antC36=./usecase/mu0_10mhz/ant_4.bin #CC9
92 antC37=./usecase/mu0_10mhz/ant_5.bin #CC9
93 antC38=./usecase/mu0_10mhz/ant_6.bin #CC9
94 antC39=./usecase/mu0_10mhz/ant_7.bin #CC9
95 antC40=./usecase/mu0_10mhz/ant_8.bin #CC10
96 antC41=./usecase/mu0_10mhz/ant_9.bin #CC10
97 antC42=./usecase/mu0_10mhz/ant_10.bin #CC10
98 antC43=./usecase/mu0_10mhz/ant_11.bin #CC10
99 antC44=./usecase/mu0_10mhz/ant_12.bin #CC11
100 antC45=./usecase/mu0_10mhz/ant_13.bin #CC11
101 antC46=./usecase/mu0_10mhz/ant_14.bin #CC11
102 antC47=./usecase/mu0_10mhz/ant_15.bin #CC11
104 rachEanble=1 # Enable (1)| disable (0) PRACH configuration
105 prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
107 antPrachC0=./usecase/mu0_10mhz/ant_0.bin
108 antPrachC1=./usecase/mu0_10mhz/ant_1.bin
109 antPrachC2=./usecase/mu0_10mhz/ant_2.bin
110 antPrachC3=./usecase/mu0_10mhz/ant_3.bin
112 ## control of IQ byte order
113 iqswap=0 #do swap of IQ before send buffer to eth
114 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
117 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
118 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
119 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
121 CPenable=1 #(1) C-Plane is enabled| (0) C-Plane is disabled
122 c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
123 u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
126 totalBFWeights=32 # Total number of Beamforming Weights on RU
127 Tadv_cp_dl=25 #in us TODO: update per RU implementation
128 #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
130 #Reception Window C-plane DL
131 T2a_min_cp_dl=400 #in us
132 T2a_max_cp_dl=1120 #in us
134 #Reception Window C-plane UL
135 T2a_min_cp_ul=400 #in us
136 T2a_max_cp_ul=1120 #in us
138 #Reception Window U-plane
139 T2a_min_up=200 # in us
140 T2a_max_up=1120 # in us
146 ###########################################################
149 #Transmission Window Fast C-plane DL
153 ##Transmission Window Fast C-plane UL
158 ##Transmission Window
165 ###########################################################