1 #******************************************************************************
3 # Copyright (c) 2019 Intel.
5 # Licensed under the Apache License, Version 2.0 (the "License");
6 # you may not use this file except in compliance with the License.
7 # You may obtain a copy of the License at
9 # http://www.apache.org/licenses/LICENSE-2.0
11 # Unless required by applicable law or agreed to in writing, software
12 # distributed under the License is distributed on an "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 # See the License for the specific language governing permissions and
15 # limitations under the License.
17 #******************************************************************************/
20 # This is simple configuration file. Use '#' sign for comments
21 instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
22 appMode=1 # O-DU(0) | O-RU(1)
23 xranMode=0 # Category A (0) (precoder in O-DU) | Category B (1) (precoder in RU)
24 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
25 antNum=4 # Number of Antennas per CC (default: 4) or number of Digital streams for Category B
28 mu=1 #30Khz Sub Carrier Spacing
30 ttiPeriod=500 # in us TTI period (30Khz default 500us)
32 nDLAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
33 nULAbsFrePointA=3568160 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
34 nDLBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
35 nULBandwidth=100 #Carrier bandwidth for in MHz. Value: 5->400
39 nFrameDuplexType=1 # 0 - FDD 1 - TDD
40 nTddPeriod=10 #[0-9] DDDSUUDDDD, for S it's 6:4:4
41 sSlotConfig0=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
42 sSlotConfig1=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
43 sSlotConfig2=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
44 sSlotConfig3=0,0,0,0,0,0,2,2,2,2,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
45 sSlotConfig4=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
46 sSlotConfig5=1,1,1,1,1,1,1,1,1,1,1,1,1,1 # (0) - DL (1) - UL (2) - GUARD
47 sSlotConfig6=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
48 sSlotConfig7=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
49 sSlotConfig8=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
50 sSlotConfig9=0,0,0,0,0,0,0,0,0,0,0,0,0,0 # (0) - DL (1) - UL (2) - GUARD
52 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
53 #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
54 Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
59 duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
60 ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
61 duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
62 ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
65 duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
66 ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
67 duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
68 ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
70 numSlots=40 #number of slots per IQ files
71 antC0=./usecase/mu1_100mhz/ant_0.bin #CC0
72 antC1=./usecase/mu1_100mhz/ant_1.bin #CC0
73 antC2=./usecase/mu1_100mhz/ant_2.bin #CC0
74 antC3=./usecase/mu1_100mhz/ant_3.bin #CC0
75 antC4=./usecase/mu1_100mhz/ant_4.bin #CC1
76 antC5=./usecase/mu1_100mhz/ant_5.bin #CC1
77 antC6=./usecase/mu1_100mhz/ant_6.bin #CC1
78 antC7=./usecase/mu1_100mhz/ant_7.bin #CC1
79 antC8=./usecase/mu1_100mhz/ant_8.bin #CC2
80 antC9=./usecase/mu1_100mhz/ant_9.bin #CC2
81 antC10=./usecase/mu1_100mhz/ant_10.bin #CC2
82 antC11=./usecase/mu1_100mhz/ant_11.bin #CC2
83 antC12=./usecase/mu1_100mhz/ant_12.bin #CC3
84 antC13=./usecase/mu1_100mhz/ant_13.bin #CC3
85 antC14=./usecase/mu1_100mhz/ant_14.bin #CC3
86 antC15=./usecase/mu1_100mhz/ant_15.bin #CC3
88 antPrachC0=./usecase/mu1_100mhz/ant_0.bin #CC0
89 antPrachC1=./usecase/mu1_100mhz/ant_1.bin #CC0
90 antPrachC2=./usecase/mu1_100mhz/ant_2.bin #CC0
91 antPrachC3=./usecase/mu1_100mhz/ant_3.bin #CC0
92 antPrachC4=./usecase/mu1_100mhz/ant_4.bin #CC1
93 antPrachC5=./usecase/mu1_100mhz/ant_5.bin #CC1
94 antPrachC6=./usecase/mu1_100mhz/ant_6.bin #CC1
95 antPrachC7=./usecase/mu1_100mhz/ant_7.bin #CC1
96 antPrachC8=./usecase/mu1_100mhz/ant_8.bin #CC2
97 antPrachC9=./usecase/mu1_100mhz/ant_9.bin #CC2
98 antPrachC10=./usecase/mu1_100mhz/ant_10.bin #CC2
99 antPrachC11=./usecase/mu1_100mhz/ant_11.bin #CC2
100 antPrachC12=./usecase/mu1_100mhz/ant_12.bin #CC3
101 antPrachC13=./usecase/mu1_100mhz/ant_13.bin #CC3
102 antPrachC14=./usecase/mu1_100mhz/ant_14.bin #CC3
103 antPrachC15=./usecase/mu1_100mhz/ant_15.bin #CC3
105 rachEanble=1 # Enable (1)| disable (0) PRACH configuration
106 prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
108 ###########################################################
110 DynamicSectionEna=1 # 1 - enable dynamic section allocation 0 - static sections all RBs are used
113 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
115 PrbElemDl0=0,36,0,14,1,1,0,16,1
116 PrbElemDl1=36,36,0,14,2,1,0,16,1
117 PrbElemDl2=72,36,0,14,3,1,0,16,1
118 PrbElemDl3=108,36,0,14,4,1,0,16,1
119 PrbElemDl4=144,36,0,14,5,1,0,16,1
120 PrbElemDl5=180,36,0,14,6,1,0,16,1
121 PrbElemDl6=216,36,0,14,7,1,0,16,1
122 PrbElemDl7=252,21,0,14,8,1,0,16,1
126 #nRBStart, nRBSize, nStartSymb, numSymb, nBeamIndex, bf_weight_update, compMethod, iqWidth, BeamFormingType
128 PrbElemUl0=0,36,0,14,1,1,0,16,1
129 PrbElemUl1=36,36,0,14,2,1,0,16,1
130 PrbElemUl2=72,36,0,14,3,1,0,16,1
131 PrbElemUl3=108,36,0,14,4,1,0,16,1
132 PrbElemUl4=144,36,0,14,5,1,0,16,1
133 PrbElemUl5=180,36,0,14,6,1,0,16,1
134 PrbElemUl6=216,36,0,14,7,1,0,16,1
135 PrbElemUl7=252,21,0,14,8,1,0,16,1
137 ###########################################################
139 ## control of IQ byte order
140 iqswap=0 #do swap of IQ before send buffer to eth
141 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
144 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
145 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
146 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
148 CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
151 Tadv_cp_dl=25 # in us
152 # C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
153 #Reception Window C-plane DL
154 T2a_min_cp_dl=285 # 285.42us
155 T2a_max_cp_dl=392 # 428.12us
157 #Reception Window C-plane UL
158 T2a_min_cp_ul=285 # 285.42us
159 T2a_max_cp_ul=429 # 428.12us
161 #Reception Window U-plane
162 T2a_min_up=71 # 71.35in us
163 T2a_max_up=428 # 428.12us
169 ###########################################################
172 #Transmission Window Fast C-plane DL
176 ##Transmission Window Fast C-plane UL
181 ##Transmission Window
182 T1a_min_up=96 #71 + 25 us
183 T1a_max_up=196 #71 + 25 us
188 ###########################################################