1 #******************************************************************************
3 # Copyright (c) 2019 Intel.
5 # Licensed under the Apache License, Version 2.0 (the "License");
6 # you may not use this file except in compliance with the License.
7 # You may obtain a copy of the License at
9 # http://www.apache.org/licenses/LICENSE-2.0
11 # Unless required by applicable law or agreed to in writing, software
12 # distributed under the License is distributed on an "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 # See the License for the specific language governing permissions and
15 # limitations under the License.
17 #******************************************************************************/
20 # This is simple configuration file. Use '#' sign for comments
21 instanceId=1 # 0,1,2,... in case more than 1 application started on the same system
22 appMode=1 # O-DU(0) | O-RU(1)
23 xranMode=0 # Category A (0) (precoder in lls-CU) | Category B (1) (precoder in RU)
24 ccNum=1 # Number of Componnent Carriers (CC) per ETH port with XRAN protocol (default:1 max: 12)
25 antNum=4 # Number of Antennas per CC (default: 4)
28 mu=0 #15Khz Sub Carrier Spacing
29 ttiPeriod=1000 # in us TTI period (15Khz default 1000us)
30 nDLAbsFrePointA=2645460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
31 nULAbsFrePointA=2525460 #nAbsFrePointA - Abs Freq Point A of the Carrier Center Frequency for in KHz Value: 450000->52600000
32 nDLBandwidth=10 #Carrier bandwidth for in MHz. Value: 5->400
33 nULBandwidth=10 #Carrier bandwidth for in MHz. Value: 5->400
37 nFrameDuplexType=0 # 0 - FDD 1 - TDD
38 nTddPeriod=0 #TDD priod e.g. DDDS 4
40 MTUSize=9600 #maximum transmission unit (MTU) is the size of the largest protocol data unit (PDU) that can be communicated in a single
41 #xRAN network layer transaction. supported 1500 bytes and 9600 bytes (Jumbo Frame)
42 Gps_Alpha=0 #alpha and beta value as in section 9.7.2 of ORAN spec
47 duMac0=00:11:22:33:44:66 # asigned MAC of O-DU VF
48 ruMac0=00:11:22:33:44:55 # O-RU VF for O-RU app
49 duMac1=00:11:22:33:44:66 # asigned MAC of O-DU VF
50 ruMac1=00:11:22:33:44:55 # O-RU VF for O-RU app
53 duMac2=00:11:22:33:44:77 # asigned MAC of O-DU VF
54 ruMac2=00:11:22:33:44:44 # O-RU VF for O-RU app
55 duMac3=00:11:22:33:44:77 # asigned MAC of O-DU VF
56 ruMac3=00:11:22:33:44:44 # O-RU VF for O-RU app
58 numSlots=20 #number of slots per IQ files
60 antC0=./usecase/cat_a/mu0_10mhz/ant_0.bin #CC0
61 antC1=./usecase/cat_a/mu0_10mhz/ant_1.bin #CC0
62 antC2=./usecase/cat_a/mu0_10mhz/ant_2.bin #CC0
63 antC3=./usecase/cat_a/mu0_10mhz/ant_3.bin #CC0
64 antC4=./usecase/cat_a/mu0_10mhz/ant_4.bin #CC1
65 antC5=./usecase/cat_a/mu0_10mhz/ant_5.bin #CC1
66 antC6=./usecase/cat_a/mu0_10mhz/ant_6.bin #CC1
67 antC7=./usecase/cat_a/mu0_10mhz/ant_7.bin #CC1
68 antC8=./usecase/cat_a/mu0_10mhz/ant_8.bin #CC2
69 antC9=./usecase/cat_a/mu0_10mhz/ant_9.bin #CC2
70 antC10=./usecase/cat_a/mu0_10mhz/ant_10.bin #CC2
71 antC11=./usecase/cat_a/mu0_10mhz/ant_11.bin #CC2
72 antC12=./usecase/cat_a/mu0_10mhz/ant_12.bin #CC3
73 antC13=./usecase/cat_a/mu0_10mhz/ant_13.bin #CC3
74 antC14=./usecase/cat_a/mu0_10mhz/ant_14.bin #CC3
75 antC15=./usecase/cat_a/mu0_10mhz/ant_15.bin #CC3
76 antC16=./usecase/cat_a/mu0_10mhz/ant_0.bin #CC4
77 antC17=./usecase/cat_a/mu0_10mhz/ant_1.bin #CC4
78 antC18=./usecase/cat_a/mu0_10mhz/ant_2.bin #CC4
79 antC19=./usecase/cat_a/mu0_10mhz/ant_3.bin #CC4
80 antC20=./usecase/cat_a/mu0_10mhz/ant_4.bin #CC5
81 antC21=./usecase/cat_a/mu0_10mhz/ant_5.bin #CC5
82 antC22=./usecase/cat_a/mu0_10mhz/ant_6.bin #CC5
83 antC23=./usecase/cat_a/mu0_10mhz/ant_7.bin #CC5
84 antC24=./usecase/cat_a/mu0_10mhz/ant_8.bin #CC6
85 antC25=./usecase/cat_a/mu0_10mhz/ant_9.bin #CC6
86 antC26=./usecase/cat_a/mu0_10mhz/ant_10.bin #CC6
87 antC27=./usecase/cat_a/mu0_10mhz/ant_11.bin #CC6
88 antC28=./usecase/cat_a/mu0_10mhz/ant_12.bin #CC7
89 antC29=./usecase/cat_a/mu0_10mhz/ant_13.bin #CC7
90 antC30=./usecase/cat_a/mu0_10mhz/ant_14.bin #CC7
91 antC31=./usecase/cat_a/mu0_10mhz/ant_15.bin #CC7
92 antC32=./usecase/cat_a/mu0_10mhz/ant_0.bin #CC8
93 antC33=./usecase/cat_a/mu0_10mhz/ant_1.bin #CC8
94 antC34=./usecase/cat_a/mu0_10mhz/ant_2.bin #CC8
95 antC35=./usecase/cat_a/mu0_10mhz/ant_3.bin #CC8
96 antC36=./usecase/cat_a/mu0_10mhz/ant_4.bin #CC9
97 antC37=./usecase/cat_a/mu0_10mhz/ant_5.bin #CC9
98 antC38=./usecase/cat_a/mu0_10mhz/ant_6.bin #CC9
99 antC39=./usecase/cat_a/mu0_10mhz/ant_7.bin #CC9
100 antC40=./usecase/cat_a/mu0_10mhz/ant_8.bin #CC10
101 antC41=./usecase/cat_a/mu0_10mhz/ant_9.bin #CC10
102 antC42=./usecase/cat_a/mu0_10mhz/ant_10.bin #CC10
103 antC43=./usecase/cat_a/mu0_10mhz/ant_11.bin #CC10
104 antC44=./usecase/cat_a/mu0_10mhz/ant_12.bin #CC11
105 antC45=./usecase/cat_a/mu0_10mhz/ant_13.bin #CC11
106 antC46=./usecase/cat_a/mu0_10mhz/ant_14.bin #CC11
107 antC47=./usecase/cat_a/mu0_10mhz/ant_15.bin #CC11
109 rachEanble=1 # Enable (1)| disable (0) PRACH configuration
110 prachConfigIndex=189 # PRACH config index as per TS36.211 - Table 5.7.1-2 : PRACH Configuration Index
112 antPrachC0=./usecase/cat_a/mu0_10mhz/ant_0.bin
113 antPrachC1=./usecase/cat_a/mu0_10mhz/ant_1.bin
114 antPrachC2=./usecase/cat_a/mu0_10mhz/ant_2.bin
115 antPrachC3=./usecase/cat_a/mu0_10mhz/ant_3.bin
117 ## control of IQ byte order
118 iqswap=0 #do swap of IQ before send buffer to eth
119 nebyteorderswap=1 #do swap of byte order for each I and Q from CPU byte order to network byte order
122 debugStop=1 #stop app on 1pps boundary (gps_second % 30)
123 debugStopCount=0 #if this value is >0 then stop app after x transmission packets, otherwise app will stop at 1pps boundary
124 bbdevMode=-1 #bbdev mode, -1 = not use bbdev, 0: use software mode, 1: use hardware mode
126 CPenable=0 #(1) C-Plane is enabled| (0) C-Plane is disabled
127 c_plane_vlan_tag=1 #VLAN Tag used for C-Plane
128 u_plane_vlan_tag=2 #VLAN Tag used for U-Plane
131 totalBFWeights=32 # Total number of Beamforming Weights on RU
132 Tadv_cp_dl=25 #in us TODO: update per RU implementation
133 #C-Plane messages must arrive at the RU some amount of time in advance (Tcp_adv_dl) of the corresponding U-Plane messages
135 #Reception Window C-plane DL
136 T2a_min_cp_dl=400 #in us
137 T2a_max_cp_dl=850 #in us
139 #Reception Window C-plane UL
140 T2a_min_cp_ul=400 #in us
141 T2a_max_cp_ul=850 #in us
143 #Reception Window U-plane
144 T2a_min_up=200 # in us
145 T2a_max_up=800 # in us
151 ###########################################################
154 #Transmission Window Fast C-plane DL
158 ##Transmission Window Fast C-plane UL
163 ##Transmission Window
170 ###########################################################