1 # Makefile.in generated by automake 1.15 from Makefile.am.
4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
19 if test -z '$(MAKELEVEL)'; then \
21 elif test -n '$(MAKE_HOST)'; then \
23 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
29 am__make_running_with_option = \
30 case $${target_option-} in \
32 *) echo "am__make_running_with_option: internal error: invalid" \
33 "target option '$${target_option-}' specified" >&2; \
37 sane_makeflags=$$MAKEFLAGS; \
38 if $(am__is_gnu_make); then \
39 sane_makeflags=$$MFLAGS; \
44 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
45 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
51 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
53 for flg in $$sane_makeflags; do \
54 test $$skip_next = yes && { skip_next=no; continue; }; \
57 -*I) strip_trailopt 'I'; skip_next=yes;; \
58 -*I?*) strip_trailopt 'I';; \
59 -*O) strip_trailopt 'O'; skip_next=yes;; \
60 -*O?*) strip_trailopt 'O';; \
61 -*l) strip_trailopt 'l'; skip_next=yes;; \
62 -*l?*) strip_trailopt 'l';; \
63 -[dEDm]) skip_next=yes;; \
64 -[JT]) skip_next=yes;; \
67 *$$target_option*) has_opt=yes; break;; \
71 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
72 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
73 pkgdatadir = $(datadir)/@PACKAGE@
74 pkgincludedir = $(includedir)/@PACKAGE@
75 pkglibdir = $(libdir)/@PACKAGE@
76 pkglibexecdir = $(libexecdir)/@PACKAGE@
77 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78 install_sh_DATA = $(install_sh) -c -m 644
79 install_sh_PROGRAM = $(install_sh) -c
80 install_sh_SCRIPT = $(install_sh) -c
81 INSTALL_HEADER = $(INSTALL_DATA)
82 transform = $(program_transform_name)
89 build_triplet = @build@
92 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
93 am__aclocal_m4_deps = \
94 $(top_srcdir)/m4/ax_check_compile_and_link_flag.m4 \
95 $(top_srcdir)/m4/ax_check_compile_flag.m4 \
96 $(top_srcdir)/m4/ax_code_coverage.m4 \
97 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
98 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
99 $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
100 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
102 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
103 $(am__configure_deps) $(am__DIST_COMMON)
104 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
105 configure.lineno config.status.lineno
106 mkinstalldirs = $(install_sh) -d
107 CONFIG_HEADER = config.h
109 CONFIG_CLEAN_VPATH_FILES =
110 AM_V_P = $(am__v_P_@AM_V@)
111 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
114 AM_V_GEN = $(am__v_GEN_@AM_V@)
115 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
116 am__v_GEN_0 = @echo " GEN " $@;
118 AM_V_at = $(am__v_at_@AM_V@)
119 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
124 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
125 ctags-recursive dvi-recursive html-recursive info-recursive \
126 install-data-recursive install-dvi-recursive \
127 install-exec-recursive install-html-recursive \
128 install-info-recursive install-pdf-recursive \
129 install-ps-recursive install-recursive installcheck-recursive \
130 installdirs-recursive pdf-recursive ps-recursive \
131 tags-recursive uninstall-recursive
132 am__can_run_installinfo = \
133 case $$AM_UPDATE_INFO_DIR in \
135 *) (install-info --version) >/dev/null 2>&1;; \
137 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
138 am__vpath_adj = case $$p in \
139 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
142 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
144 am__nobase_strip_setup = \
145 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
147 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
148 am__nobase_list = $(am__nobase_strip_setup); \
149 for p in $$list; do echo "$$p $$p"; done | \
150 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
151 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
152 if (++n[$$2] == $(am__install_max)) \
153 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
154 END { for (dir in files) print dir, files[dir] }'
156 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
157 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
158 am__uninstall_files_from_dir = { \
160 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
161 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
162 $(am__cd) "$$dir" && rm -f $$files; }; \
164 am__installdirs = "$(DESTDIR)$(docsdir)"
166 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
167 distclean-recursive maintainer-clean-recursive
168 am__recursive_targets = \
169 $(RECURSIVE_TARGETS) \
170 $(RECURSIVE_CLEAN_TARGETS) \
171 $(am__extra_recursive_targets)
172 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
173 cscope distdir dist dist-all distcheck
174 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
176 # Read a list of newline-separated strings from the standard input,
177 # and print each of them once, without duplicates. Input order is
179 am__uniquify_input = $(AWK) '\
180 BEGIN { nonempty = 0; } \
181 { items[$$0] = 1; nonempty = 1; } \
182 END { if (nonempty) { for (i in items) print i; }; } \
184 # Make sure the list of sources is unique. This is necessary because,
185 # e.g., the same source file might be shared among _SOURCES variables
186 # for different programs/libraries.
187 am__define_uniq_tagged_files = \
188 list='$(am__tagged_files)'; \
189 unique=`for i in $$list; do \
190 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
191 done | $(am__uniquify_input)`
195 DIST_SUBDIRS = $(SUBDIRS)
196 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
197 $(top_srcdir)/config/ar-lib $(top_srcdir)/config/compile \
198 $(top_srcdir)/config/config.guess \
199 $(top_srcdir)/config/config.sub \
200 $(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
201 $(top_srcdir)/config/missing AUTHORS ChangeLog config/ar-lib \
202 config/compile config/config.guess config/config.sub \
203 config/install-sh config/ltmain.sh config/missing
204 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
205 distdir = $(PACKAGE)-$(VERSION)
206 top_distdir = $(distdir)
207 am__remove_distdir = \
208 if test -d "$(distdir)"; then \
209 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
210 && rm -rf "$(distdir)" \
211 || { sleep 5 && rm -rf "$(distdir)"; }; \
213 am__post_remove_distdir = $(am__remove_distdir)
216 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
217 sed_rest='s,^[^/]*/*,,'; \
218 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
219 sed_butlast='s,/*[^/]*$$,,'; \
220 while test -n "$$dir1"; do \
221 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
222 if test "$$first" != "."; then \
223 if test "$$first" = ".."; then \
224 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
225 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
227 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
228 if test "$$first2" = "$$first"; then \
229 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
233 dir0="$$dir0"/"$$first"; \
236 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
239 DIST_ARCHIVES = $(distdir).tar.gz
241 DIST_TARGETS = dist-gzip
242 distuninstallcheck_listfiles = find . -type f -print
243 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
244 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
245 distcleancheck_listfiles = find . -type f -print
247 ADD_CFLAGS = @ADD_CFLAGS@
249 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
251 ASAN_ENV_FLAGS = @ASAN_ENV_FLAGS@
252 AUTOCONF = @AUTOCONF@
253 AUTOHEADER = @AUTOHEADER@
254 AUTOMAKE = @AUTOMAKE@
257 CCDEPMODE = @CCDEPMODE@
259 CFLAGS_M32 = @CFLAGS_M32@
260 CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@
261 CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@
262 CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@
263 CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@
264 CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@
265 CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@
267 CPPFLAGS = @CPPFLAGS@
270 CXXDEPMODE = @CXXDEPMODE@
271 CXXFLAGS = @CXXFLAGS@
272 CYGPATH_W = @CYGPATH_W@
276 DSYMUTIL = @DSYMUTIL@
288 INSTALL_DATA = @INSTALL_DATA@
289 INSTALL_PROGRAM = @INSTALL_PROGRAM@
290 INSTALL_SCRIPT = @INSTALL_SCRIPT@
291 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
297 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
298 LIBFUZZER_CFLAGS = @LIBFUZZER_CFLAGS@
304 LTLIBOBJS = @LTLIBOBJS@
305 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
306 MAKEINFO = @MAKEINFO@
307 MANIFEST_TOOL = @MANIFEST_TOOL@
316 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
317 PACKAGE_NAME = @PACKAGE_NAME@
318 PACKAGE_STRING = @PACKAGE_STRING@
319 PACKAGE_TARNAME = @PACKAGE_TARNAME@
320 PACKAGE_URL = @PACKAGE_URL@
321 PACKAGE_VERSION = @PACKAGE_VERSION@
323 PATH_SEPARATOR = @PATH_SEPARATOR@
325 SANITIZER_CFLAGS = @SANITIZER_CFLAGS@
327 SET_MAKE = @SET_MAKE@
329 SKELETONS_CFLAGS = @SKELETONS_CFLAGS@
331 TESTSUITE_CFLAGS = @TESTSUITE_CFLAGS@
335 abs_builddir = @abs_builddir@
336 abs_srcdir = @abs_srcdir@
337 abs_top_builddir = @abs_top_builddir@
338 abs_top_srcdir = @abs_top_srcdir@
339 ac_ct_AR = @ac_ct_AR@
340 ac_ct_CC = @ac_ct_CC@
341 ac_ct_CXX = @ac_ct_CXX@
342 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
343 am__include = @am__include@
344 am__leading_dot = @am__leading_dot@
345 am__quote = @am__quote@
347 am__untar = @am__untar@
350 build_alias = @build_alias@
351 build_cpu = @build_cpu@
352 build_os = @build_os@
353 build_vendor = @build_vendor@
354 builddir = @builddir@
356 datarootdir = @datarootdir@
359 exec_prefix = @exec_prefix@
361 host_alias = @host_alias@
362 host_cpu = @host_cpu@
364 host_vendor = @host_vendor@
366 includedir = @includedir@
368 install_sh = @install_sh@
370 libexecdir = @libexecdir@
371 localedir = @localedir@
372 localstatedir = @localstatedir@
375 oldincludedir = @oldincludedir@
378 program_transform_name = @program_transform_name@
380 runstatedir = @runstatedir@
382 sharedstatedir = @sharedstatedir@
384 sysconfdir = @sysconfdir@
385 target_alias = @target_alias@
386 top_build_prefix = @top_build_prefix@
387 top_builddir = @top_builddir@
388 top_srcdir = @top_srcdir@
389 ACLOCAL_AMFLAGS = -I m4
390 CODE_COVERAGE_IGNORE_PATTERN = "tests/*" "lex.yy.c" "y.tab.c" "asn1p_l.l" "asn1p_y.y"
392 libasn1common libasn1parser \
393 libasn1fix libasn1print \
395 asn1c skeletons tests \
398 docsdir = $(datadir)/doc/asn1c
399 docs_DATA = README.md INSTALL.md REQUIREMENTS.md FAQ ChangeLog BUGS
400 EXTRA_DIST = README.md INSTALL.md REQUIREMENTS.md FAQ LICENSE BUGS
402 $(MAKE) $(AM_MAKEFLAGS) all-recursive
405 am--refresh: Makefile
407 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
409 case '$(am__configure_deps)' in \
411 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
412 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
417 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
418 $(am__cd) $(top_srcdir) && \
419 $(AUTOMAKE) --foreign Makefile
420 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
423 echo ' $(SHELL) ./config.status'; \
424 $(SHELL) ./config.status;; \
426 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
427 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
430 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
431 $(SHELL) ./config.status --recheck
433 $(top_srcdir)/configure: $(am__configure_deps)
434 $(am__cd) $(srcdir) && $(AUTOCONF)
435 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
436 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
437 $(am__aclocal_m4_deps):
440 @test -f $@ || rm -f stamp-h1
441 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
443 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
445 cd $(top_builddir) && $(SHELL) ./config.status config.h
446 $(srcdir)/config.h.in: $(am__configure_deps)
447 ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
452 -rm -f config.h stamp-h1
461 -rm -f libtool config.lt
462 install-docsDATA: $(docs_DATA)
464 @list='$(docs_DATA)'; test -n "$(docsdir)" || list=; \
465 if test -n "$$list"; then \
466 echo " $(MKDIR_P) '$(DESTDIR)$(docsdir)'"; \
467 $(MKDIR_P) "$(DESTDIR)$(docsdir)" || exit 1; \
469 for p in $$list; do \
470 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
472 done | $(am__base_list) | \
473 while read files; do \
474 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docsdir)'"; \
475 $(INSTALL_DATA) $$files "$(DESTDIR)$(docsdir)" || exit $$?; \
480 @list='$(docs_DATA)'; test -n "$(docsdir)" || list=; \
481 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
482 dir='$(DESTDIR)$(docsdir)'; $(am__uninstall_files_from_dir)
484 # This directory's subdirectories are mostly independent; you can cd
485 # into them and run 'make' without going through this Makefile.
486 # To change the values of 'make' variables: instead of editing Makefiles,
487 # (1) if the variable is set in 'config.status', edit 'config.status'
488 # (which will cause the Makefiles to be regenerated when you run 'make');
489 # (2) otherwise, pass the desired values on the 'make' command line.
490 $(am__recursive_targets):
492 if $(am__make_keepgoing); then \
493 failcom='fail=yes'; \
498 target=`echo $@ | sed s/-recursive//`; \
500 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
501 *) list='$(SUBDIRS)' ;; \
503 for subdir in $$list; do \
504 echo "Making $$target in $$subdir"; \
505 if test "$$subdir" = "."; then \
507 local_target="$$target-am"; \
509 local_target="$$target"; \
511 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
514 if test "$$dot_seen" = "no"; then \
515 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
518 ID: $(am__tagged_files)
519 $(am__define_uniq_tagged_files); mkid -fID $$unique
523 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
526 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
527 include_option=--etags-include; \
530 include_option=--include; \
533 list='$(SUBDIRS)'; for subdir in $$list; do \
534 if test "$$subdir" = .; then :; else \
535 test ! -f $$subdir/TAGS || \
536 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
539 $(am__define_uniq_tagged_files); \
541 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
542 test -n "$$unique" || unique=$$empty_fix; \
543 if test $$# -gt 0; then \
544 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
547 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
551 ctags: ctags-recursive
554 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
555 $(am__define_uniq_tagged_files); \
556 test -z "$(CTAGS_ARGS)$$unique" \
557 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
561 here=`$(am__cd) $(top_builddir) && pwd` \
562 && $(am__cd) $(top_srcdir) \
563 && gtags -i $(GTAGS_ARGS) "$$here"
565 test ! -s cscope.files \
566 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
569 cscope.files: clean-cscope cscopelist
570 cscopelist: cscopelist-recursive
572 cscopelist-am: $(am__tagged_files)
573 list='$(am__tagged_files)'; \
574 case "$(srcdir)" in \
575 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
576 *) sdir=$(subdir)/$(srcdir) ;; \
578 for i in $$list; do \
579 if test -f "$$i"; then \
580 echo "$(subdir)/$$i"; \
584 done >> $(top_builddir)/cscope.files
587 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
588 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
590 distdir: $(DISTFILES)
591 $(am__remove_distdir)
592 test -d "$(distdir)" || mkdir "$(distdir)"
593 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
594 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
595 list='$(DISTFILES)'; \
596 dist_files=`for file in $$list; do echo $$file; done | \
597 sed -e "s|^$$srcdirstrip/||;t" \
598 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
599 case $$dist_files in \
600 */*) $(MKDIR_P) `echo "$$dist_files" | \
601 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
604 for file in $$dist_files; do \
605 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
606 if test -d $$d/$$file; then \
607 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
608 if test -d "$(distdir)/$$file"; then \
609 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
611 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
612 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
613 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
615 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
617 test -f "$(distdir)/$$file" \
618 || cp -p $$d/$$file "$(distdir)/$$file" \
622 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
623 if test "$$subdir" = .; then :; else \
625 || test -d "$(distdir)/$$subdir" \
626 || $(MKDIR_P) "$(distdir)/$$subdir" \
628 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
630 new_distdir=$$reldir; \
631 dir1=$$subdir; dir2="$(top_distdir)"; \
633 new_top_distdir=$$reldir; \
634 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
635 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
636 ($(am__cd) $$subdir && \
637 $(MAKE) $(AM_MAKEFLAGS) \
638 top_distdir="$$new_top_distdir" \
639 distdir="$$new_distdir" \
640 am__remove_distdir=: \
641 am__skip_length_check=: \
642 am__skip_mode_fix=: \
647 -test -n "$(am__skip_mode_fix)" \
648 || find "$(distdir)" -type d ! -perm -755 \
649 -exec chmod u+rwx,go+rx {} \; -o \
650 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
651 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
652 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
653 || chmod -R a+r "$(distdir)"
655 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
656 $(am__post_remove_distdir)
659 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
660 $(am__post_remove_distdir)
663 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
664 $(am__post_remove_distdir)
667 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
668 $(am__post_remove_distdir)
671 @echo WARNING: "Support for distribution archives compressed with" \
672 "legacy program 'compress' is deprecated." >&2
673 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
674 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
675 $(am__post_remove_distdir)
678 @echo WARNING: "Support for shar distribution archives is" \
680 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
681 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
682 $(am__post_remove_distdir)
685 -rm -f $(distdir).zip
686 zip -rq $(distdir).zip $(distdir)
687 $(am__post_remove_distdir)
690 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
691 $(am__post_remove_distdir)
693 # This target untars the dist file and tries a VPATH configuration. Then
694 # it guarantees that the distribution is self-contained by making another
697 case '$(DIST_ARCHIVES)' in \
699 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
701 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
703 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
705 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
707 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
709 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
711 unzip $(distdir).zip ;;\
713 chmod -R a-w $(distdir)
715 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
717 test -d $(distdir)/_build || exit 0; \
718 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
719 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
721 && $(am__cd) $(distdir)/_build/sub \
723 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
724 $(DISTCHECK_CONFIGURE_FLAGS) \
725 --srcdir=../.. --prefix="$$dc_install_base" \
726 && $(MAKE) $(AM_MAKEFLAGS) \
727 && $(MAKE) $(AM_MAKEFLAGS) dvi \
728 && $(MAKE) $(AM_MAKEFLAGS) check \
729 && $(MAKE) $(AM_MAKEFLAGS) install \
730 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
731 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
732 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
734 && chmod -R a-w "$$dc_install_base" \
736 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
737 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
738 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
739 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
740 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
741 } || { rm -rf "$$dc_destdir"; exit 1; }) \
742 && rm -rf "$$dc_destdir" \
743 && $(MAKE) $(AM_MAKEFLAGS) dist \
744 && rm -rf $(DIST_ARCHIVES) \
745 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
748 $(am__post_remove_distdir)
749 @(echo "$(distdir) archives ready for distribution: "; \
750 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
751 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
753 @test -n '$(distuninstallcheck_dir)' || { \
754 echo 'ERROR: trying to run $@ with an empty' \
755 '$$(distuninstallcheck_dir)' >&2; \
758 $(am__cd) '$(distuninstallcheck_dir)' || { \
759 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
762 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
763 || { echo "ERROR: files left after uninstall:" ; \
764 if test -n "$(DESTDIR)"; then \
765 echo " (check DESTDIR support)"; \
767 $(distuninstallcheck_listfiles) ; \
769 distcleancheck: distclean
770 @if test '$(srcdir)' = . ; then \
771 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
774 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
775 || { echo "ERROR: files left in build directory after distclean:" ; \
776 $(distcleancheck_listfiles) ; \
779 check: check-recursive
780 all-am: Makefile $(DATA) config.h
781 installdirs: installdirs-recursive
783 for dir in "$(DESTDIR)$(docsdir)"; do \
784 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
786 install: install-recursive
787 install-exec: install-exec-recursive
788 install-data: install-data-recursive
789 uninstall: uninstall-recursive
792 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
794 installcheck: installcheck-recursive
796 if test -z '$(STRIP)'; then \
797 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
798 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
801 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
802 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
803 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
810 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
811 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
813 maintainer-clean-generic:
814 @echo "This command is intended for maintainers to use"
815 @echo "it deletes files that may require special tools to rebuild."
816 clean: clean-recursive
818 clean-am: clean-generic clean-libtool mostlyclean-am
820 distclean: distclean-recursive
821 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
823 distclean-am: clean-am distclean-generic distclean-hdr \
824 distclean-libtool distclean-tags
838 install-data-am: install-docsDATA
840 install-dvi: install-dvi-recursive
846 install-html: install-html-recursive
850 install-info: install-info-recursive
856 install-pdf: install-pdf-recursive
860 install-ps: install-ps-recursive
866 maintainer-clean: maintainer-clean-recursive
867 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
868 -rm -rf $(top_srcdir)/autom4te.cache
870 maintainer-clean-am: distclean-am maintainer-clean-generic
872 mostlyclean: mostlyclean-recursive
874 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
884 uninstall-am: uninstall-docsDATA
886 .MAKE: $(am__recursive_targets) all install-am install-strip
888 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
889 am--refresh check check-am clean clean-cscope clean-generic \
890 clean-libtool cscope cscopelist-am ctags ctags-am dist \
891 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
892 dist-xz dist-zip distcheck distclean distclean-generic \
893 distclean-hdr distclean-libtool distclean-tags distcleancheck \
894 distdir distuninstallcheck dvi dvi-am html html-am info \
895 info-am install install-am install-data install-data-am \
896 install-docsDATA install-dvi install-dvi-am install-exec \
897 install-exec-am install-html install-html-am install-info \
898 install-info-am install-man install-pdf install-pdf-am \
899 install-ps install-ps-am install-strip installcheck \
900 installcheck-am installdirs installdirs-am maintainer-clean \
901 maintainer-clean-generic mostlyclean mostlyclean-generic \
902 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
903 uninstall-am uninstall-docsDATA
908 @CODE_COVERAGE_RULES@
910 # Tell versions [3.59,3.63) of GNU make to not export all variables.
911 # Otherwise a system limit (for SysV at least) may be exceeded.