2 API and build change and fix summaries. Doc correctsions
3 and/or changes are not mentioned here; see the commit messages.
5 2020 February 29; Version 2.4.0
6 Add consolidated testing under CMake
7 Add support binary for health check (SI95 only)
9 2020 February 28; Version 2.3.6
10 Fix bug in Rt. Mgr comm which prevented table ID from being
11 sent on ack message (RIC-232).
13 2020 February 26; version 3.2.5
14 Fix source address bug in SI95 receive/send funcitons.
15 Fix threading issues involving session disconnection in SI95
16 Remove unused SI95 status variable.
18 2020 February 24; version 3.2.4
19 Fix meid bug (RIC-220) causing core dump.
21 2020 February 21; version 3.2.3
22 Add meid routing support to the SI95 interface.
24 2020 February 20; version 3.2.2
25 Fix receive thread related core dump (ring early unlock).
27 2020 February 19; version 3.2.1
28 Added missing message types (E2-Setup)
30 2020 February 18; version 3.2.0
31 Added support for new Route Manager and it's ability to accept
32 a request for table update.
34 2020 February 14; version 3.1.3
35 Fix bug in SIsend which was causing a core dump in some cases
36 where the application attempted to send on a connection that
37 had disconnected. (RIC-207).
39 2020 February 6; version 3.1.2
40 Fix disconnection detection bug in interface to SI95.
42 2020 January 31; verison 3.1.1
43 Allow route table thread logging to be completely disabled
44 when logging is turned off.
46 2020 January 26; verison 3.1.0
47 First step to allowing the user programme to control messages
48 written to standard error. Introduces the rmr_set_vlevel()
49 function, and related environment variable.
51 2020 January 24; verison 3.0.5
52 Fix bug in SI95 with receive buffer allocation.
54 2020 January 23; verison 3.0.4
55 Fix bug in SI95 causing excessive CPU usage on poll.
57 2020 January 22; verison 3.0.3
58 Enable thread support for multiple receive threads.
60 2020 January 21; verison 3.0.2
61 Fix bug in SI95 (missing reallocate payload function).
63 2020 January 20; verison 3.0.1
64 Enable support for dynamic route table updates via RMR session.
66 2020 January 16; version 3.0.0
67 Introduce support for SI95 transport library to replace NNG.
68 (RMR library versions will use leading odd numbers to avoid tag collisions
69 with the wrapper tags which will use even numbers.)
71 2019 December 9; version 1.13.1
72 Correct documentation and missing rel-notes update for RTD.
74 2019 December 6; version 1.13.0
75 Add ability to route messages based on the MEID in a message combined
76 with the message type/subscription-ID.
79 2019 November 14; version 1.11.1 (Amber)
80 Fix bug in payload reallocation function; correct length of payload
81 was not always copied.
83 2019 November 13; version 1.12.1
84 New message type constants added to support A1.
86 2019 November 4; version 1.11.0 (Amber)
87 Version bump to move away from the 1.10.* to distinguish between
88 release A and the trial.
90 2019 November 7; version 1.12.0
91 Version cut to support continued development for next release
92 preserving the 1.11.* versions for release 1 (Amber) and
95 2019 October 31; version 1.10.2
96 Provide the means to increase the payload size of a received message
97 without losing the data needed to use the rmr_rts_msg() funciton.
99 2019 October 21; version 1.10.1
100 Fix to prevent null message buffer from being returned by the timeout
101 receive function if the function is passed one to reuse.
103 2019 October 21; version 1.10.1
104 Add periodic dump of send count info to stderr.
106 2019 September 27; version 1.9.0
107 Python bindings added receive all queued function and corrected a unit test
109 2019 September 25; version 1.8.3
110 Correct application level test issue causing timing problems during
111 jenkins verification testing at command and merge
113 Handle the NNG connection shutdown status which may now be
114 generated when a connection throug a proxy is reset.
116 2019 September 25; version 1.8.2
117 Correct bug in rmr_torcv_msg() when timeout set to zero (0).
119 2019 September 19; version 1.8.1
120 Correct missing constant for wrappers.
122 2019 September 19; version 1.8.0
123 New message types added:
124 RAN_CONNECTED, RAN_RESTARTED, RAN_RECONFIGURED
126 2019 September 17; version 1.7.0
127 Initial connection mode now defaults to asynchronous. Set RMR_ASYNC_CONN=0
128 in the environment before rmr_init() is invoked to revert to
129 synchronous first TCP connections. (Recovery connection attempts
130 have always been asynchronous).
132 2019 September 3; version 1.6.0
133 Fix bug in the rmr_rts_msg() function. If a return to sender message
134 failed, the source IP address was not correctly adjusted and could
135 cause the message to be "reflected" back to the sender on a retry.
137 Added the ability to set the source "ID" via an environment var
138 (RMR_SRC_ID). When present in the environment, the string will
139 be placed in to the message header as the source and thus be used
140 by an application calling rmr_rts_smg() to return a response to
141 the sender. If this environment variable is not present, the host
142 name (original behaviour) is used.
144 2019 August 26; version 1.4.0
145 New message types were added.
147 2019 August 16; version 1.3.0
148 New mesage types added.
150 2019 August 13; version 1.2.0 (API change, non-breaking)
151 The function rmr_get_xact() was added to proide a convenient
152 way to extract the transaction field from a message.
154 2019 August 8; version 1.1.0 (API change)
155 This change should be backward compatable/non-breaking
156 A new field has been added to the message buffer (rmr_mbuf_t).
157 This field (tp_state) is used to communicate the errno value
158 that the transport mechanism might set during send and/or
159 receive operations. C programmes should continue to use
160 errno directly, but in some environments wrappers may not be
161 able to access errno and this provides the value to them.
162 See the rmr_alloc_msg manual page for more details.
164 2019 August 6; version 1.0.45 (build changes)
165 Support for the Nanomsg transport library has been dropped.
166 The library librmr.* will no longer be included in packages.
168 Packages will install RMR libraries into the system preferred
169 target directory. On some systems this is /usr/local/lib
170 and on others it is /usr/local/lib64. The diretory is
171 determined by the sytem on which the package is built and
172 NOT by the system installing the package, so it's possible
173 that the RMR libraries end up in a strange location if the
174 .deb or .rpm file was generated on a Linux flavour that
175 has a different preference than the one where the package
178 2019 August 6; version 1.0.44 (API change)
179 Added a new message type constant.
181 2019 July 15; Version 1.0.39 (bug fix)
182 Prevent unnecessary usleep in retry loop.
184 2019 July 12; Version 1.0.38 (API change)
185 Added new message types to RIC_message_types.h.
187 2019 July 11; Version 1.0.37
189 librmr and librmr_nng
190 - Add message buffer API function rmr_trace_ref()
191 (see rmr_trace_ref.3 manual page in dev package).