Add message types for E2 setup
[ric-plt/lib/rmr.git] / CHANGES
1
2 API and build change  and fix summaries. Doc correctsions
3 and/or changes are not mentioned here; see the commit messages.
4
5 2020 February 19; version 3.2.1
6         Added missing message types (E2-Setup)
7
8 2020 February 18; version 3.2.0
9         Added support for new Route Manager and it's ability to accept
10         a request for table update.
11
12 2020 February 14; version 3.1.3
13         Fix bug in SIsend which was causing a core dump in some cases
14         where the application attempted to send on a connection that
15         had disconnected. (RIC-207).
16
17 2020 February 6; version 3.1.2
18         Fix disconnection detection bug in interface to SI95.
19
20 2020 January 31; verison 3.1.1
21         Allow route table thread logging to be completely disabled
22         when logging is turned off.     
23
24 2020 January 26; verison 3.1.0
25         First step to allowing the user programme to control messages
26         written to standard error. Introduces the rmr_set_vlevel()
27         function, and related environment variable.
28
29 2020 January 24; verison 3.0.5
30         Fix bug in SI95 with receive buffer allocation.
31
32 2020 January 23; verison 3.0.4
33         Fix bug in SI95 causing excessive CPU usage on poll.
34
35 2020 January 22; verison 3.0.3
36         Enable thread support for multiple receive threads.
37
38 2020 January 21; verison 3.0.2
39         Fix bug in SI95 (missing reallocate payload function).
40
41 2020 January 20; verison 3.0.1
42         Enable support for dynamic route table updates via RMR session.
43
44 2020 January 16; version 3.0.0
45         Introduce support for SI95 transport library to replace NNG.
46         (RMR library versions will use leading odd numbers to avoid tag collisions
47          with the wrapper tags which will use even numbers.)
48
49 2019 December 9; version 1.13.1
50         Correct documentation and missing rel-notes update for RTD.
51
52 2019 December 6; version 1.13.0
53         Add ability to route messages based on the MEID in a message combined
54         with the message type/subscription-ID.
55
56
57 2019 November 14; version 1.11.1 (Amber)
58         Fix bug in payload reallocation function; correct length of payload
59         was not always copied.
60
61 2019 November 13; version 1.12.1
62         New message type constants added to support A1.
63
64 2019 November 4; version 1.11.0 (Amber)
65         Version bump to move away from the 1.10.* to distinguish between
66         release A and the trial.
67
68 2019 November 7; version 1.12.0
69         Version cut to support continued development for next release
70         preserving the 1.11.* versions for release 1 (Amber) and 
71         related fixes.
72
73 2019 October 31; version 1.10.2
74         Provide the means to increase the payload size of a received message
75         without losing the data needed to use the rmr_rts_msg() funciton.
76
77 2019 October 21; version 1.10.1
78         Fix to prevent null message buffer from being returned by the timeout
79         receive function if the function is passed one to reuse.
80
81 2019 October 21; version 1.10.1
82         Add periodic dump of send count info to stderr.
83
84 2019 September 27; version 1.9.0
85         Python bindings added receive all queued function and corrected a unit test
86
87 2019 September 25; version 1.8.3
88         Correct application level test issue causing timing problems during
89         jenkins verification testing at command and merge
90
91         Handle the NNG connection shutdown status which may now be
92         generated when a connection throug a proxy is reset.
93
94 2019 September 25; version 1.8.2
95         Correct bug in rmr_torcv_msg() when timeout set to zero (0).
96
97 2019 September 19; version 1.8.1
98         Correct missing constant for wrappers.
99
100 2019 September 19; version 1.8.0
101         New message types added:
102                 RAN_CONNECTED, RAN_RESTARTED, RAN_RECONFIGURED
103
104 2019 September 17; version 1.7.0
105         Initial connection mode now defaults to asynchronous. Set RMR_ASYNC_CONN=0
106         in the environment before rmr_init() is invoked to revert to
107         synchronous first TCP connections. (Recovery connection attempts
108         have always been asynchronous).
109
110 2019 September 3; version 1.6.0
111         Fix bug in the rmr_rts_msg() function. If a return to sender message
112         failed, the source IP address was not correctly adjusted and could
113         cause the message to be "reflected" back to the sender on a retry.
114
115         Added the ability to set the source "ID" via an environment var
116         (RMR_SRC_ID).  When present in the environment, the string will
117         be placed in to the message header as the source and thus be used
118         by an application calling rmr_rts_smg() to return a response to
119         the sender.  If this environment variable is not present, the host
120         name (original behaviour) is used.
121
122 2019 August 26; version 1.4.0
123         New message types were added.
124
125 2019 August 16; version 1.3.0
126         New mesage types added.
127
128 2019 August 13; version 1.2.0 (API change, non-breaking)
129         The function rmr_get_xact() was added to proide a convenient
130         way to extract the transaction field from a message.
131
132 2019 August 8; version 1.1.0 (API change)
133         This change should be backward compatable/non-breaking
134         A new field has been added to the message buffer (rmr_mbuf_t).
135         This field (tp_state) is used to communicate the errno value
136         that the transport mechanism might set during send and/or
137         receive operations.  C programmes should continue to use
138         errno directly, but in some environments wrappers may not be
139         able to access errno and this provides the value to them.
140         See the rmr_alloc_msg manual page for more details.
141
142 2019 August 6; version 1.0.45 (build changes)
143         Support for the Nanomsg transport library has been dropped.
144                 The library librmr.* will no longer be included in packages.
145
146         Packages will install RMR libraries into the system preferred
147                 target directory. On some systems this is /usr/local/lib
148                 and on others it is /usr/local/lib64.  The diretory is
149                 determined by the sytem on which the package is built and
150                 NOT by the system installing the package, so it's possible
151                 that the RMR libraries end up in a strange location if the
152                 .deb or .rpm file was generated on a Linux flavour that
153                 has a different preference than the one where the package
154                 is installed.
155
156 2019 August 6; version 1.0.44 (API change)
157         Added a new message type constant.
158
159 2019 July 15; Version 1.0.39 (bug fix)
160         Prevent unnecessary usleep in retry loop.
161
162 2019 July 12; Version 1.0.38 (API change)
163         Added new message types to RIC_message_types.h.
164
165 2019 July 11; Version 1.0.37
166
167         librmr and librmr_nng
168                 - Add message buffer API function rmr_trace_ref()
169                   (see rmr_trace_ref.3 manual page in dev package).
170